Used Equipment
Used Equipment For Sale by Current Member Golf Courses or Companies

The purpose of the used equipment page is to allow low budget golf courses to have access to good used equipment at a lower cost to their club. Equipment postings are limited to current Carolinas GCSA members only. We cannot post brand new equipment for companies whose primary goal is the sale of golf course maintenance equipment. 

If your club, course, or company has good used equipment for sale and you would like to post it on the Carolinas GCSA website, complete the Used Equipment Form.  Please allow 3 - 5 business days for your posting to be uploaded. 

3 Jacobsen LF 510,  Hours varies 900 to 1200,  Yr. 2013, $15,000

Jacobsen 1900d 150 hrs, Yr. 2013 $17,500

True Turf Roller with Spyker (almost new) $9,500

Toro 3100d Sidewinder (reels) 2550 hours $6,000 

Contact Al Hicks, Owner of East Coast Equipment Consultants, 511 Lakeview Dr., Rincon, GA 31326
Phone: 912-346-6091

Date Posted: October 10, 2016


Two 2012 Toro 5510 1260 hrs. and 1320 hrs. recently ground.  Very good condition.  $22,500
Contact: Kevin at 843-575-1512 at The Fripp Company / Ocean Point GC, Harbor Island, NC
Date Posted:  September 23, 2016


Planet Air Trifecta Tow Behind Aerator/Verticutter w/Flex 5 Roller, Unit in very good condition, like brand new. $19,900.

18 Turf Breeze Fans for Sale from $2,500 to $5,800

Contact Kevin Redfern, The Governors Club at 919-619-9200 or
Date Posted:  8/18/16

1st Products Area-Vator, Model: VA-60 , Condition: Very Good,  Aera-Vator with changeable shaft, $5,500.00

DEMO BRUSH DRESSER, Make: GKB, Model: 130, Condition: Excellent,  DEMO Brush dresser to distribute loose materials, e.g. sand, gravel or rubber; Speed adjustable hydraulic spreading brush; Layer thickness metering valve mechanically adjustable; Four pivoting balloon tires for optimal ground pressure; Power consumption 2, $11,500


GKB VSTRONG, Model: 200, Condition: Excellent, The Vstrong uses the Combi-Rotor system,which can be used for both total removal,with the fraising blades,as well verticutting 2”(5cm)depth.The depth can be adjusted using a patented pendulum system between the front and rear roller. The width is 78", $12,000.00

Contact Randy Cole, STEC Equipment at 864-225-3666 or
Date Posted:  8/18/16


Club Car Carryall 2 Gas 2010 Top and Headlight $3479
Club Car Carryall 2 Gas 2011 Top and Headlight $3795
Club Car Carryall 2 Gas 2012 Top and Headlight $3995

Contact Steve Neiswender, Regional Sales Manager at Golf Cart Service, 4380 South Church Street Ext., Roebuck, SC 29376
Phone: 864-640-7594
Date Posted: August 11, 2016


2 Jacobson 3800 fairway mowers. in use now. $5,000 each. 65% reel life. 2800 to 3000 hours.
1 SISIS pull type slicer $2,500. Great shape with new blades. Hyd. lift 

Contact Chad Berry, Superintendent of Golden Hills Golf and Country Club, 100 Scotland Dr., Lexington, SC 29072-8052
Phone: 803-730-0702
Date Posted: July 5, 2016


John Deere 3235B unit has a hydraulic leak but I have been told it has a good motor.
*Make an offer or willing to trade for other equipment*

Contact Randall Story, Superintendent at Applewood Golf Course, 6130 Story Mill Rd., Keysville, GA 30816
Phone: 706-360-6100
Date Posted: May 26, 2016


John Deere 2653A, 2700 hrs. $3,000
Metermatic SP topdresser, $1,000
John Deere 220 greens mower w/ lapping machine, $500
2 nice watercooler enclosures, $100 each
17 granite yardage markers, 61-172 yards, $10 each 
12 rental pullcarts, $10 each

Contact Robert Grobusky, Owner/Supt at Blue Ridge Golf Center, 2499 Blue Ridge Blvd., Walhalla, SC 29691
Phone:  864-650-4126
Date Posted:  May 3, 2016


90’s Model Foley Reel Grinder and a Neary Bedknife Grinder.  Both in good shape with all attachments and in use until a while back when they were replaced.
*Make an offer or trade for a working 3 point hitch drill seeder or pedal start carryall. I can email or text pictures on request.*

Contact Joey Galloway, Golf Course Superintendent, Connestee Falls, 33 Connestee Trail, Brevard, NC 28712
Phone: 828-884-5008                                      
Date Posted:  April 26, 2016


Woodbay GreensIron 3000 Greens Roller. 5.5 HP Honda Engine. Bi-Directional Chain Drive. Very Good condition. Needs brake cable. Trailer included which could double as walk mower/utility/spreader trailer. $3,500.00
Pics at

Jacobsen AeroKing Greens Aerifier. 3-Point Hitch. Compact 48" width. Min. 18HP @ PTO. $4,000. Comes with rolling storage stand.
Pics at

Aerway 3-Point Hitch Aerator. Comes with "Greens Shatter Tines" installed. Has self-contained storage legs. It is "Drop and Go". $3,000.00. Additional Tine Drum pictured below is available for $400 with this machine. These tines are for compacted soils.
Pics at

*Will consider a package offer for all items listed above.*

Contact Scott Ray, Occoneechee Golf Club, PO Box 759, Hillsborough, NC 27278
Phone: 919-636-9804
Date Posted:  April 14, 2016


Toro/Ozmac Decoder Modules for wideband Osmac.  I have 8.  Asking $800 for all 8.

Contact Kyle Traynham, Willow Creek Golf, Greer, SC  
Phone:  864-670-9426
Date Posted:  April 11, 2016


Toro Hydroject 3000, engine runs strong, hydraulics are weak. Not sure if pump functions or not. Would make a good parts machine or repairable unit. $600 OBO

Contact: Josh Newnam,Winston Salem, NC 27107
Phone:  336-580-5579                                    
Date Posted:  January 28, 2016